First Response Emergency Equipment, LLC
Adaptors-Threaded
Adaptors-Storz
Adaptors-Haz-Mat
Bags-Carry
Brackets
Batteries
Footwear-Boots
Carabineers
Chemicals
Caps & Plugs
Clothing
Communications
Dry Hydrant
FF Hoods
FF & Ext.Gloves
FF Goggles
FF Suspenders
FF Helmets
FF Turn-Out Gear
FF Hose Nozzle
FF Hose
FF Hose Suction
FF Hose Strainers
FF Hose Washer
Flash Lights & Acc.
Foam/Equipment
Gaskets
Gauges
Harnesses
Ladders
Light Bar & Acc.
Medical Supplies
Novelty/Gifts
Portable Water Tanks
Ropes/Slings
Safety Vest
Station Wear
Tarps/Salvage Covers
Thermal Imagers
Tools/Acc.
Traffic Control
Training Equipment
Truck Acc.
Used Equipment
Valves/Wyes
Water Rescue
Wildland
Manufactures

 

HomeAbout UsContact UsSearchGuest Book

Gloves

 

 

  • Ringer Barrier 1 Extrication Gloves
  • Waterproof and breathable Hipora® barrier to protect hands from micro-organisms such as TB, Hepatitus, Staph and HIV meets O.S.H.A. Bloodborne Pathogens Standards (29CFR 1910.1030)
  • Boxed finger tip design for better fit and comfort
  • Elastic cuff and gaitor to keep out glass and debris
  • Molded TPR (Thermal Plastic Rubber) knuckle reduces impact, increases dexterity and features 3M™ Reflective fabric
  • Molded TPR finger knuckle and finger tip panels
  • Cut resistant Kevlar® palm and thumb panels, side panels and finger panels
  • Kevlar® stitching in high wear areas
       

Ringer

Barrier One-Green & Black

327 XS-XXXL 

$53.00

 

Barrier One-All Black

323 XS-XXXL

$53.00

 

                            

Ringer Rope Rescue Gloves

·         Unique gel padding rope control channel

·         Pittard's Armortan® palm

·         Premium Synthetic Leather palm and fingertip patches

·         Incredible fingertip dexterity allows knot untying without removing gloves

·         Kevlar® stitching

·         Neoprene padded knuckles

·         Glove will not shrink, stretch or harden

·         Non-binding elastic secure

 

Ringer

Rope Rescue Glove Black

353 S-XXL

$36.00

 

Rope Rescue Glove Red

355 S-XXL

$36.00

 

Shelby FDP Koala/Gore Glove w/Wristlet
This glove is constructed of 3.25 to 4.0 oz. Midnight Blue Koala Tanned Cowhide (will remain soft after repeated soakings), Gore RT7100 Glove Barrier Fabric and Shelby "Black Line" Nomex Wristlet. It is NFPA Compliant, Fire Retardant and Heat Resistant.
 

Product Code: 5227

Price:  $55.00   S-XL

           $58.00   Jumbo

 

Shelby FDP Koala/Gore Glove w/Gauntlet
This glove is constructed of 3.25 to 4.0 oz. Midnight Blue Koala Tanned Cowhide (will remain soft after repeated soakings), and Gore RT7100 Glove Barrier Fabric. Gauntlet Style. It is NFPA Compliant, Fire Retardant and Heat Resistant.
 

Product Code: 5228

Price:  $53.00  S-XL

            $55.00  Jumbo

 

SHELBY GLOVE SPECS
Model 5284 & 5285
Specifications:  
Outer Shell: Glove back of highly flexible dual stretch 10.25oz. Simplex® 100% Kevlar® with atmospheric open width. Palm is heavy weight Fire Retardant, Heat Resistant, 3.5 to 4.0 oz., Koala® Tanned Cowhide. This tanned leather will remain soft after repeated soakings.
Thermal Liner: 8.5 oz. Insular Kevlar/Nomex air Locking Spacer with atmospheric open width. Fabric is vellecular structure with an 18 CPI stitch count.
Protective Barrier: Crosstech Direct Grip Glove Insert
Finger Tip Backs: 3M Scotchlite™ Reflective Material in Silver color with Flame Resistant Fabric. Fabric is bonded to expose retro-reflective lenses with backing. RA values are 330 and 250 at Observation Angles of 0.2° and 0.33° respectively.
Wristlet: Nomex 10.5 oz per yard, Double Ply, 4" Wristlet. Wristlet sewn to liner, and then sewn seperately to the glove shell.
Wrist Pull: 3" x 3 1/2" Round Leather Pull, Sewn to Wristlet & Glove Body
Thread: Sewn with High burst strength Kevlar (30/5) lock stitch, 8-10 stitches per inch
Hanger Loop: 1/4" fire retardant, Split Cowhide, Hanger Loop
Label: Label shall be Permanently Attached to each glove and certifies the glove meets or exceeds the requirements of the latest NFPA standards (1971, Standard on Protective Ensemble for Structural Firefighting, 2000 Edition). Label shall be durable and include the following information: name or designation of manufacture; model; name or style number; lot or serial number; size; date of certification tests; patent numbers; cleaning and care instructions. Label to be sewn to inside of glove.
Glove is constructed, tested and labeled in accordance with the NFPA Standard on Protective Ensemble for Structural Fire Fighting, NFPA 1971-2000 Edition. The glove is certified by the Safety Equipment Institute (SEI)
Origin: Made in U.S.A.
Sizes: X-Small, Small, Medium, Large, X-Large, Jumbo

Design & Construction:

Glove shall be a gunn cut pattern with wrap around index finger and wing thumb. The highly flexible Simplex Kevlar back improves hand flexibility and affords more comfortable seams. The combined moisture barrier and thermal liner is Crosstech Direct Grip glove insert, which is sewn in at the fingertips and wrist areas. The highly insular Kevlar/Nomex air locking spacer is applied to the back of the glove to improve thermal values where they are neeed most. Fingertip backs are of exposed retro-reflective 3M Scotchlite™. The glove body shall extend 2" above the wrist crease and shall have a shirred elastic snuggler on the top and bottom of wrist areas.
 

5284   $98.00   S-XL  

         $100.00    XXL

5285   $97.00   S-XL

          $99.00   XXL

 

 

 

 

 

 

   

Gloves & Accessories

Glove Straps, Red, Yellow, Black

 
8807-00 $4.00
     
 
You Are Visitor #   Hit Counter

First Response Emergency Equipment, LLC. All rights reserved..
Copyright © 2008  .
Revised: 06/07/09